AirgainConnect® Antenna-Modem for Public Safety and Fleet

Products

  • Products Overview
  • Antenna-Modem
  • Fleet, M2M, IIoT Antennas (Antenna Plus)
  • Embedded Antennas
  • Dipole Antennas
  • Carrier-Class Antennas
  • AirgainConnect® AC-HPUE™ FWA

    Fixed Wireless Access Multi-Band High Power LTE Antenna-Modem

    3xLTE
    • Description
    • Specification
    • Documentation

    The AirgainConnect FirstNet Ready™ AC-HPUE-FWA fixed wireless HPUE antenna-modem is ideal for mounting on a pole, on a wall, or for use in a rapid deployment kit.  It comes pre-assembled with a ventilated IP67 enclosure and includes the following:

    • Antenna-modem attached to a water-tight housing with the Ethernet Injector inside

    • Industrial grade FirstNet SIM card installed

    • Wall-mount AC power adapter

    • Mounting bracket with clamps for attaching to a pole or to a wall

    • Water-tight power cable

    • Water-tight ethernet cable

    • Custom power cable lengths are available in 10ft increments up to 300ft

    The AC-HPUE-FWA high power user equipment (HPUE) built for FirstNet® MegaRange™, delivers the maximum allowed radiated power directly to the LTE antenna elements. The uplink signal is the weakest link in the LTE connection, which can be problematic in fringe coverage areas or inside buildings such as parking structures. When the uplink is disconnected, the user gets no service in the downlink. 

    AirgainConnect’s patented technology eliminates the loss over the coax cables from the router to the antenna, up to providing up to 10 times the transmit power when compared to a router and conventional modem. The result is greater coverage range, deeper building penetration and higher data throughput speeds at the edge of the network on all bands. 

    AC-HPUE-FWA provides two high gain multi-band LTE antennas and one band 14 LTE antenna powered by an HPUE LTE modem. AC-HPUE attaches to the router WAN port via Ethernet data cable.

    Electrical Data

    Power: 24VDC

     

    LTE Modem

    Cat 12, 3GPP Release 12+

     

    Element 1

    Band 14 output power: 1.25W (Class 1)

    Elements 2 & 3

    Bands 2, 4, 5, 12, 17, 29, 30, 66 output power: 200mW (Class 3)

    MIMO: 2 x 2, 4 x 2

     

    Transmit bandwidth: 1.4 MHz through 20 MHz

     

    WCDMA capabilities on bands 2, 4, 5

     

    Mounting Data

    Dimensions

    Height: 3.27″ (83.1 mm)

    Width: 5.79″ (147.0 mm)

    Length: 7.95″ (201.9 mm)

    Weight

    1.7lbs (771g)

    Mount

    Bracket Mount

    Color

    White (WH)

    SIM Card

    3FF Micro SIM card support

     

    Environmental Data

    Operating Temperature

    -30ºC to +70ºC

    Extended Operating Temperature

    +70ºC to +80ºC

    Dust & Waterproof Rooftop Housing

    IP67

    Vibration

    MIL-STD-810G

    Shock

    IEC 60068-2-27-2008

    Temperature & Humidity

    IEC 60068-2-30-2008

    Solar Loading

    IEC 60068-2-5

    Request more information

    Complete the contact form and a representative will get back to you right away.

    Your Name (required)

    Your Company (required)

    Your Title (required)

    E-mail (required)

    Your Phone Number (required)

    Your Inquiry

    Kate StonelyAirgainConnect AC-HPUE FWA